Відео

Thanks for this, Was wondering how this would work out

thank you

I connected everything and it works but fans light not turning on

Msi center doesn’t even change the colors for me only way I can change them to to manually press the led button on pc.

I have the issue of the fans are working all fine no issues at all with temps ect, rgb are also on but stuck in 1 colour. However they will not show up in icue even after updating the icue to latest? Any ideas?

I had to completely uninstall Gigabyte RGBFusion. No loss, there...

For some reason, when I go into aura effects, I am only able to change the colour of my processor and the strip in my case

in music it has three colors only???

My motherboard is ASUS PRIME A520M-K Is it support this software in my motherboard?

***********************COMMANDER MINI*****************

Just remove the +5v wire from the icue hardware and provide power to the LEDs from a dedicated 5v power source with the correct amp rating.

My controller is visible only in software updates (on iCUE), and I cannot get it to show as a device to tell it I want to control RBG on port 5 & 6. Does anyone has a solution? RGB on fans 1-4 work fine.

Thanks! Been looking looking on how to clean/remove the front panel

Be aware the "Commander core" Corsair provide with there high end AIO kits is not the same as the stand alone Commander Cores. The 2 temperature ports top and bottom are not there and there is a 24 pin connector for the AIO version you have purchased which the stand alone version does not have. If you already own a commander core and want to install a Corsair AIO it is pretty much useless to you. Corsair may have simplified the wiring but they need to make standard boxes instead of a box they say is a commander core but actually isn't. NZXT do exactly the same thing with there AIO's.

This is almost the perfect case, pity you can't use an ATX motherboard. I have 420mm AIO which would fit nicely, But there are not too many Quality Micro ATX boards that use the AM5 Socket, that don't break the bank

helped a bunch. thx

My friend brought them from the US today, which I ordered a couple months ago It looks like a lot of work. Does it work with Lighting Node Core? It came with my QL120 Tripple Fan pack.

Thank you for this review. Recently purchased this case. It looks really sharp!

I can’t believe such a HUGE case doesn’t support ATX mb

I wonder if the new Tower 250 will fit a matx board 🤷‍♂

can i do the same with the tower 100? pls welp😢

Great info as always!! Could you use something like NZXT Internal USB Hub if you are using your internal USB connections already?

I recently switch from the QX to RX fans, RX fans are defiantly not as pretty, but both CPU and GPU temp have dropped 5c.

Your laundry is done 😂

Corsair are running a scam here. It should not cost this much to make a few proprietary lights blink. RGB needs to be standardized and open sourced ASAP.

This is a great video of the options, but I'm seeing a lot of complaints from people that Asus Aura doesn't work reliably. I currently have a Thermaltake Tower900 with their RGB fittings and res/pump combos. I'm controlling it all with their TT RGB Plus app and it works fairly well. Some odd bugs once in a while, but nothing major. I'm getting ready to do a full rebuild of my system and was looking at what other RGB options are in the market. A lot of them say they work with Aura, but it sounds like people have a lot of issues getting everything to work together. Being able to sync with full color smart bulbs in the room would be awesome, though.

I did a complete iCue Link build in my Hyte Y60. Had to buy extra cables from Corsair to get enough 90° connections. The extra cost for that was stupid annoying and won't ever use that system again. I just bought a Tower 300 for a new build for my wife. Thinking of doing a Lian Li cooling build this time. Reversible LCD fans are cheaper than iCue.

I just upgraded my PC a few weeks ago, and I got a ATX mobo. Im now case hunting and I'm finding the same problem everywhere I go with cases that I can afford, having a ATX mobo is making it hard to find a case I can afford and have room in, this case looked like a contender but I'm still undecided and don't know if I should get it. Great video tho

Corsair really needs to start making reverse blade fans

Vey useful, thanks. Really wish they made one device where I could connect more than 12 fans to.

It's like you said, RX are the "performance fans". They are Corsair's attempt at keeping up with the likes of Noctua and Phanteks. They are much better for radiator and airflow use. QX are the showcase fans. They look fantastic but aren't well suited for serious watercooling or airflow applications - or rather there are far better, quieter, and cheaper fans for that.

Hell yes that's nice... Just about to install a bunch of normally wired fans and an AIO cooler into my system but these look nicer to setup.

The Tower 300 is listed on the compatible cases page on MSI website.

I cannot sync the rgb lighting to my ram or other fans. please help. my motherboard is nzxt n7

is there another way to do this without bloatware?

My bazooka v2 b450 only has a 4 pin rgb header I only have a 3 pin connector what do I do? I am a noob and new to rgb. All I need to hook up is 4 fans with rgb. For my montech air 100 case

B760, msi slim 4060ti and 3 apnx fp2 fans. I can only controll rgb on mobo, but the rest is on default. How can I sync all of them?

Ill probably end up going with the pro due to the fact that I can connect two rgb hubs and get 12 rgb fan control off one device. Ill plug in 6 fans on the com pro and the other 9 to my mobo. Thanks!

Did yours come with standoff screws for motherboard? Mines didn’t

Hi there, I am a new subscriber, first of all I really enjoy your videos, second, in your opinion, for Atx motherboards which one do you prefer the most, the Musetex K2 or the Y6, beforehand thank you so much 🫡

Dude thank you for this video! It's helped me think about how i can make a build with a custom loop, two thin rads, with a gpu and cpu water block. You covered some dimensions that are not noted in the build manual. You're awesome!

Will they work if I don't use the included controller and use a separate hub plugged into my motherboard's ARGB header?

It's the power cable I'm frustrated with. I've been trying to get hold of a 6pin male to 6pin male power cable to run it all. I managed to get one but came from Germany. I connected it but the system would not power on , so I'm stuck with what power cable to get. Why they give you this small rubbish cable is beyond me.

im trying to do this in the exact opsit way i want to control the msi stuff with icue i dont want to controll it with mysticlhgit

I have a Msi case not motherboard will it work for my case but If it doesn’t what software would work with it my case is a msi mag forge 111r

im using tuf gaming b460 pro wifi mobo ATX and i5 10400f but this mobo cant set my ram higher than 2666mhz eventhough i have 3000mhz in my pc. been using this spec for almost 3 years now so i want to upgrade to at least i5 12th gen and anything lga 1700 mobo but i can only find MATX mobo in my online shopping app for my country so this really helps alot

These cost the same as Thermaltakes EX120 Swafan 3 pack which come with built in reverse blade customization ability and no plastic joiners to break. If these fans for a 3 pk were in the $50 range which about what they are worth in terms of quality and performance they would be the new budget king fan. $90 for these in a 3pk is just not worth it seeing as Lian Li Unifans and Thermaltake Swafans cost the same. Great try Phanteks Fans are nice but way overpriced for the market they are in.

The right-hand panel and door (with the cables behind) seems awkward to remove to dust the interior, unlike the left-hand panel. Would you recommend removing it less frequently, or not at all, I don't think there's airflow on that side? (Apart from the separate fan partition).

Where is PSU :)

Great job.